Dell PowerConnect 6224 - Depends-On Ethernet

Link Dependency Commands 399
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#no add port-channel 2
depends-on ethernet
Use the depends-on ethernet command to add the dependent Ethernet ports
list.
Syntax
depends-on ethernet intf-list
• intf-list — List of Ethernet interfaces. Separate nonconsecutive ports with
a comma and no spaces. Use a hyphen to designate the range of ports.
(Range: Valid Ethernet interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#depends-on ethernet
1/g10