Dell PowerConnect 6224 - Show Backup-Config

Configuration and Image File Commands 1123
Example
The following example validates the contents of the script file config.scr .
console#script validate config.scr
show backup-config
Use the show backup-config command in Privileged EXEC mode to display
the contents of the backup configuration file.
Syntax
show backup-config
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows backup-config data.
console#show backup-config
software version 1.1
hostname device
interface ethernet 1/g1
ip address 176.242.100.100 255.255.255.0
duplex full
speed 1000
exit