Dell PowerConnect 6224 - Show Captive-Portal Configuration Interface

1086 Captive Portal Commands
Syntax
show captive-portal configuration cp-id
cp-id
—Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1
CP ID..................................... 1
CP Name................................... cp1
Operational Status........................ Disabled
Disable Reason............................
Administrator Disabled
Blocked Status............................ Not
Blocked
Authenticated Users....................... 0
show captive-portal configuration interface
Use the show captive-portal configuration interface command to display
information about all interfaces assigned to a captive portal configuration or
about a specific interface assigned to a captive portal configuration.
Syntax
show captive-portal configuration cp-id interface [ interface ]