Dell PowerConnect 6224 - Page 1087

Captive Portal Commands 1087
• cp-id —Captive Portal ID.
•
interface —Interface in unit/port format.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 interface
CP ID..................................... 1
CP Name................................... cp1
Operational
Block
Interface Interface Description Status
Status
--------- ---------------------------------------- --------
---- ---------
1/g1 Unit: 1 Slot: 0 Port: 1 Gigabit - Level Disabled
Blocked
console#show captive-portal configuration 1 interface 1/g1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/g1
Interface Description..................... Unit: 1 Slot: 0
Port: 1 Gigab...
Operational Status........................ Disabled