Dell PowerConnect 6224 - Show Crypto Key Pubkey-Chain Ssh

SSH Commands 1271
dxUXEAiDHXcWHVr0R/ak1HDQitBzeEv1vVEToEn5ddLmRhtIgRdKU
JHgBHJV
R2VaSN/WC0IK53j9re4B11AE+O3qAxwJs0KD7cTkvF9I+YdiXeOM8
VE4skkw
AiyLDNVWXgNQ6iat8+8Mjth+PIo5t3HykYUCkD8B1v93nzi/sr4hH
HJCdx7w
wRW3QtgXaGwYt2rdlr3x8ViAF6B7AKYd8xGVVjyJTD6TjrCRRwQHg
B/BHsFr
z/Rl1SYa0vFjel/7/0qaIDSHfHqWhajYkMa4xPOtIye7oqzAOm1b7
6l28uTB
luBEoLQ+PKOKMiK8sQ==
Fingerprint(hex):
58:7f:5c:af:ba:d3:60:88:42:00:b0:2f:f1:5a:a8:fc
Fingerprint(bubbleBabble): xodob-liboh-heret-tiver-
dyrib-godac-pynah-muzyt-mofim-bihog-cuxyx
show crypto key pubkey-chain ssh
Use the show crypto key pubkey-chain ssh command in Privileged EXEC
mode to display SSH public keys stored on the switch.
Syntax
show crypto key pubkey-chain ssh [username username ] [fingerprint bubble-
babble|hex]
• username — Specifies the remote SSH client username. (Range: 1–48
characters)
•
bubble-babble — Fingerprints in Bubble Babble format.
•
hex — Fingerprint in Hex format. If fingerprint is unspecified, it defaults
to Hex format.
Default Configuration
This command has no default configuration.