Dell PowerConnect 6224 Command Line Interface Guide

OSPF Commands 915
Opaque Area.................................... 0
Subtotal....................................... 0
Router database summary
Router......................................... 0
Network........................................ 0
Summary Net.................................... 0
Summary ASBR................................... 0
Type-7 Ext..................................... 0
Opaque Link.................................... 0
Opaque Area.................................... 0
Type-5 Ext..................................... 0
Self-Originated Type-5 Ext..................... 0
Opaque AS...................................... 0
Total.......................................... 0
show ip ospf interface
Use the show ip ospf interface command in Privileged EXEC mode to display
the information for the VLAN or loopback interface.
Syntax
show ip ospf interface {vlan vlan-id | loopback loopback-id }
• vlan-id — Valid VLAN ID.
•
loopback-id — Shows information the specified loopback interface.
(Range: 0–7)
Default Configuration
This command has no default configuration.

Dell PowerConnect 6224 Specifications

General

Switching Capacity	128 Gbps
Forwarding Rate	95.2 Mpps
Power Supply	100-240 VAC, 50/60 Hz
RAM	128 MB
Flash Memory	32 MB
Layer Support	Layer 2/3
Stacking	Up to 12 units
Weight	12.1 lbs
MAC Address Table Size	16, 000
Jumbo Frame Support	Up to 9, 216 bytes
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	10% to 90% (non-condensing)
Ports	24 x 10/100/1000BASE-T
VLAN Support	Yes (802.1Q)
Dimensions	17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)