Dell PowerConnect 6224 - Show Storm-Control

312 Ethernet Configuration Commands
--More-- or (q)uit
Most Address Entries Ever Used................. 141
Address Entries Currently in Use............... 124
Maximum VLAN Entries........................... 1024
Most VLAN Entries Ever Used.................... 6
Static VLAN Entries............................ 6
Dynamic VLAN Entries........................... 0
VLAN Deletes................................... 0
Time Since Counters Last Cleared............... 1 day 0 hr
42 min 13 sec
console#
show storm-control
Use the show storm-control command in Privileged EXEC mode to display
the configuration of storm control.
Syntax
show storm-control [all | interface ]
• interface — Valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example shows storm control configurations for all valid
Ethernet ports. The second example shows flow control mode status.