Command Groups 75
clear lldp statistics Resets all LLDP statistics. PE
lldp notification Enables remote data change notifications. IC
lldp notification-interval Limits how frequently remote data change
notifications are sent.
GC
lldp receive Enables the LLDP receive capability. IC
lldp timers Sets the timing parameters for local data
transmission on ports enabled for LLDP.
GC
lldp transmit Enables the LLDP advertise capability. IC
lldp transmit-mgmt Specifies that transmission of the local system
management address information in the
LLDPDUs is included.
IC
lldp transmit-tlv Specifies which optional TLVs in the 802.1AB
basic management set will be transmitted in the
LLDPDUs.
IC
show lldp Displays the current LLDP configuration
summary.
PE
show lldp connections Displays the current LLDP remote data. PE
show lldp interface Displays the current LLDP interface state. PE
show lldp local-device Displays the LLDP local data PE
show lldp remote-device Displays the LLDP remote data PE
show lldp statistics Displays the current LLDP traffic statistics. PE
lldp med Enables/disables LLDP-MED on an interface. IC
lldp med transmit-tlv Spwcifies which optional TLVs in the LLDP
MED set are transmitted in the LLDPDUs.
IC
lldp med
faststartrepeatcount
Sets the value of the fast start repeat count. GC
lldp med confignotification Enables sending the topology change
notifications.
IC
show lldp med Displays a summary of the current LLDP MED
configuration.
PE
Command Description Mode*
To Next Page
Loading...
