Ethernet Configuration Commands 313
console#show storm-control all
Bcast Bcast Mcast Mcast Ucast Ucast
Intf Mode Level Mode Level Mode Level
------ ------- ------- ------- ------- ------- -------
1/g1 Disable 5 Disable 5 Disable 5
1/g2 Disable 5 Disable 5 Disable 5
1/g3 Disable 5 Disable 5 Disable 5
1/g4 Disable 5 Disable 5 Disable 5
console#show storm-control
802.3x Flow Control Mode.......................
Disable
shutdown
Use the shutdown command in Interface Configuration mode to disable an
interface. To restart a disabled interface, use the no form of this command.
Syntax
shutdown
no shutdown
Default Configuration
The interface is enabled.
Command Mode
Interface Configuration (Ethernet, Port-Channel, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
Examples
The following example disables Ethernet port 1/g5.
To Next Page
Loading...
