Dell PowerConnect 6224 - Show Class-Map; Show Classofservice Dot1 P-Mapping

80 Command Groups
show class-map Displays all configuration information for the
specified class.
PE
show classofservice dotlp-
mapping
Displays the current Dot1p (802.1p) priority
mapping to internal traffic classes for a specific
interface.
PE
show classofservice ip-dscp-
mapping
Displays the current IP DSCP mapping to
internal traffic classes for a specific interface.
PE
show classofservice trust Displays the current trust mode setting for a
specific interface.
PE
show diffserv Displays the DiffServ General Status
information.
PE
show diffserv service
interface ethernet in
Displays policy service information for the
specified interface and direction.
PE
show diffserv service
interface port-channel in
Displays policy service information for the
specified interface and direction.
PE
show diffserv service brief Displays all interfaces in the system to which a
DiffServ policy has been attached.
PE
show interfaces cos-queue Displays the class-of-service queue
configuration for the specified interface.
PE
show policy-map Displays all configuration information for the
specified policy.
PE
show policy-map interface Displays policy-oriented statistics information
for the specified interface and direction
PE
show service-policy Displays a summary of policy-oriented statistics
information for all interfaces in the specified
direction.
PE
traffic-shape Specifies the maximum transmission
bandwidth limit for the interface as a whole.
GC
and IC
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*