Dell PowerConnect 6224 - Show Sflow Agent

Sflow Commands 1227
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
console(config-if-1/g15)#sflow 1 sampler 1500 50
show sflow agent
Use the show sflow agent command to display the sflow agent information.
Syntax
show sflow agent
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
sFlow Version Uniquely identifies the version and implementation of this
MIB. The version string must have the following structure: MIB
Version; Organization; Software Revision where:
MIB Version: 1.3, the version of this MIB.
Organization: Dell Corp.
Revision: 1.0
IP Address The IP address associated with this agent.