Dell PowerConnect 6224 - Show Ip Ospf Interface Stats

918 OSPF Commands
vlan2 Disable 0.0.0.0 1 10 40 5
11
vlan3 Disable 0.0.0.0 1 10 40 5
11
loopback2 Disable 0.0.0.0 1 10 40 5
11
show ip ospf interface stats
Use the show ip ospf interface stats command in User EXEC mode to display
the statistics for a specific interface. The information is only displayed if
OSPF is enabled.
Syntax
show ip ospf interface stats vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the ospf statistics for VLAN 15.
console>show ip ospf interface stats vlan15
OSPF Area
ID........................................... 0.0.0.0
Area Border Router
Count............................... 0