Ethernet Configuration Commands 299
show interfaces description
Use the show interfaces description command in User EXEC mode to
display the description for all configured interfaces.
Syntax
show interfaces description [ethernet
interface
| port-channel
port-channel-
number
]
•
interface —
Valid Ethernet port.
•
port-channel-number
— A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for the interface 1/g1.
console>show interfaces description
Port Description
Internal MAC Rx Errors A count of frames for which reception fails due to an
internal MAC sublayer receive error.
Received Pause Frames A count of MAC Control frames received with an opcode
indicating the PAUSE operation.
Transmit ted Pause
Frames
Counted MAC Control frames transmitted on this
interface with an opcode indicating the PAUSE operation.
Field Description
To Next Page
Loading...
