Dell PowerConnect 6224 - Show Ip Pimsm Rphash

Multicast Commands 851
Slot/Port...................................... vlan
3
IP Address.....................................
1.1.1.1
Subnet Mask....................................
255.255.255.0
Hello Interval (secs).......................... 30
Join Prune Interval (secs)..................... 60
Neighbor Count ................................ 0
Designated Router..............................
1.1.1.1
DR Priority.................................... 1
BSR Border.....................................
Disabled
show ip pimsm rphash
The show ip pimsm rphash command displays which rendezvous point (RP)
is being selected for a specified group.
Syntax
show ip pimsm rphash group-address
• group-address — Group IP address supported by RP.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode