Dell PowerConnect 6224 - Ip Igmp Snooping (Interface)

332 IGMP Snooping Commands
ip igmp snooping (global)
Use the ip igmp snooping command in Global Configuration mode to
globally enable Internet Group Management Protocol (IGMP) snooping. Use
the no form of this command to disable IGMP snooping globally.
Syntax
ip igmp snooping
no ip igmp snooping
Default Configuration
IGMP snooping is disabled.
Command Mode
Global Configuration mode
User Guidelines
IGMP snooping is enabled on static VLANs only and is not enabled on
Private VLANs or their community VLANs.
Example
The following example enables IGMP snooping.
console(config)# ip igmp snooping
ip igmp snooping (interface)
Use the ip igmp snooping command in Interface Configuration mode to
enable Internet Group Management Protocol (IGMP) snooping on a specific
interface. To disable IGMP snooping on an Ethernet interface, use the no
form of this command.
Syntax
ip igmp snooping
no ip igmp snooping