Dell PowerConnect 6224 - Show Ipv6 Ospf Area

974 OSPFv3 Commands
show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display
information about the area.
Syntax
show ipv6 ospf area areaid
• areaid — Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information about area 1.
console#show ipv6 ospf area 1
AreaID......................................... 0.0.0.1
External Routing............................... Import
External LSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0
Area LSA Checksum.............................. 0
Stub Mode...................................... Disable
Import Summary LSAs............................ Enable