660 DHCP and BOOTP Relay Commands
Syntax
bootpdhcprelay minwaittiime
integer
no bootpdhcprelay minshoshow arpshow arpwshshow arposhow
arpwshoshow arpwshow arp arp arp ashow arprpwaittime
•
integer
— Minimum wait time for BootP/DHCP Relay on the system.
(Range: 0-100 seconds)
Default Configuration
0 is the default
integer
configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a minimum wait time of 10 seconds.
console(config)#bootpdhcprelay minwaittime 10
bootpdhcprelay cidridoptmode
Use the bootpdhcprelay cidridoptmode command in Global Configuration
mode to enable the circuit ID option and remote agent ID mode for
BootP/DHCP Relay on the system. Use the ’no’ form of the command to
disable the circuit ID option and remote agent ID mode for BootP/DHCP
Relay.
Syntax
bootpdhcprelay cidridoptmode arpshow arpw arpoptshshow arposhow
arpwshow arp arpshoshow arpw arpshow arpmshow arpode
Default Configuration
Disabled is the default configuration.
To Next Page
Loading...
