130 Command Groups
System Management
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
asset-tag Specifies the switch asset-tag. GC
banner motd Specifies message-of-the-day banner. GC
banner motd
acknowledge
Acknowledges message-of-the-day banner. GC
show checkpoint
statistics
Shows the checkpointing status. PE
clear checkpoint
statistics
Clears the statistics for the checkpointing
process.
GC
cut-through mode Enables the cut-through mode on the switch. GC
hostname Specifies or modifies the switch host name. GC
intiate failover Forces failover of management unit. GC
member Configures the switch. SG
movemanagement Moves the Management Switch functionality
from one switch to another.
SG
nsf Specifies non-stop forwarding. GC
nsf restart-interval Specifies the length of the grace period on the
restarting router.
GC
no cut-through mode Disables the cut-through mode on the switch. GC
no standby Removes standby configuration in the stack. SG
ping Sends ICMP echo request packets to another
node on the network.
UE
reload Reloads the operating system. PE
set description Associates a text description with a switch in
the stack.
SG
show boot-version Displays the boot image version details. UE
show cut-through mode Show the cut-through mode on the switch. PE
Command Description Mode*
To Next Page
Loading...
