Dell PowerConnect 6224 - Page 129

Command Groups 129
Syslog
show ip ssh Displays the SSH server configuration. PE
user-key Specifies which SSH public key is manually
configured and enters the SSH public key-string
configuration command.
SP
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
clear logging Clears messages from the internal logging
buffer.
PE
clear logging file Clears messages from the logging file. PE
description Describes the syslog server. L
level Specifies the importance level of syslog
messages.
L
loggin cli-command Enable CLI command logging GC
logging Logs messages to a syslog server GC
logging buffered Limits syslog messages displayed from an
internal buffer based on severity.
GC
logging console Limits messages logged to the console based on
severity.
GC
logging facility Sets the facility of the logging messages. GC
logging file Limits syslog messages sent to the logging file
based on severity.
GC
logging on Controls error messages logging. GC
port Specifies the port number of syslog messages. L
show logging Displays the state of logging and the syslog
messages stored in the internal buffer.
PE
show logging file Displays the state of logging and the syslog
messages stored in the logging file.
PE
show syslog-servers Displays the syslog servers settings. PE
Command Description Mode*