Dell PowerConnect 6224 - Page 128

128 Command Groups
SSH
snmp-server filter Creates or updates an SNMP server filter entry. GC
snmp-server group Configures a new SNMP group or a table that
maps SNMP users to SNMP views.
GC
snmp-server host Specifies the recipient of SNMP notifications. GC
snmp-server location Sets the system location string. GC
snmp-server enable traps
authentication
Enables the switch to send SNMP traps when
authentication failed.
GC
snmp-server v3-host Specifies the recipient of SNMPv3
notifications.
GC
snmp-server user C
onfigures a new SNMP Version 3 user. GC
snmp-server view Creates or updates a Simple Network
Management Protocol (SNMP) server view
entry.
GC
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
crypto key generate dsa Generates DSA key pairs for the switch. GC
crypto key generate rsa Generates RSA key pairs for the switch. GC
crypto key pubkey-chain ssh Enters SSH Public Key-chain configuration
mode.
GC
ip ssh port Specifies the port to be used by the SSH server. GC
ip ssh pubkey-auth Enables public key authentication for incoming
SSH sessions.
GC
ip ssh server Enables the switch to be configured from a SSH
server connection.
GC
key-string Manually specifies a SSH public key. SK
show crypto key mypubkey Displays its own SSH public keys stored on the
switch.
PE
show crypto key pubkey-
chain ssh
Displays SSH public keys stored on the switch. PE
Command Description Mode*