VLAN Commands 589
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example identifies test as the protected group.
console#show switchport protected 0
Name......................................... test
show vlan
Use the show vlan command in Privileged EXEC mode to display VLAN
information.
Syntax
show vlan [id
vlan-id
| name
vlan-name
]
•
vlan-id
— A valid VLAN ID.
•
vlan-name
— A valid VLAN name string. (Range: 1–32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all VLAN information.
console#show vlan
To Next Page
Loading...
