1080 Captive Portal Commands
Interface Interface Description Type
--------- ----------------------------------- --------
1/g1 Unit: 1 Slot: 0 Port: 1 Gigabit ... Physical
Captive Portal Local User Commands
clear captive-portal users
Use the clear captive-portal users command to delete all captive portal user
entries.
Syntax
clear captive-portal users
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#clear captive-portal users
no user
Use the no user command to delete a user from the local user database. If the
user has an existing session, it is disconnected.
Syntax
no user
user-id
•
user-id
—User ID (Range: 1–128).
To Next Page
Loading...
