VLAN Commands 591
User Guidelines
This command has no user guidelines.
Example
The following example shows no entry in MAC address to VLAN cross-
reference.
console#show vlan association mac
MAC Address VLAN ID
----------------------- -------
0001.0001.0001.0001 1
console#
show vlan association subnet
Use the show vlan association subnet command in Privileged EXEC mode to
display the VLAN associated with a specific configured IP-Address and
netmask. If no IP Address and net mask are specified, the VLAN associations
of all the configured IP-subnets are displayed.
Syntax
show vlan association subnet [
ip-address ip-mask ]
•
ip-address
— Specifies IP address to be shown
•
ip-mask
— Specifies IP mask to be shown
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The command has no user guidelines.
To Next Page
Loading...
