Dell PowerConnect 6224 - Redirect-Url; Session-Timeout

1072 Captive Portal Commands
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#redirect
redirect-url
Use the redirect-url command to configure the redirect URL for a captive
portal configuration.
Syntax
redirect-url url
• url —The URL for redirection (Range: 1–512 characters).
Default Configuration
There is no redirect URL configured by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#redirect-url www.dell.com
session-timeout
Use the session-timeout command to configure the session timeout for a
captive portal configuration. Use the “no” form of this command to reset the
session timeout to the default.
Syntax
session-timeout timeout