Dell PowerConnect 6224 - Passwords Min-Length

1160 Password Management Commands
• attempts — Number of attempts the user is allowed to enter a correct
password. (Range: 1-5)
Default Configuration
The user lockout feature is disabled.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the number of user attempts before lockout at 2.
console(config)#passwords lock-out 2
passwords min-length
Use the passwords min-length command in Global Configuration mode to
configure the minimum length required for passwords in the local database.
Use the no version of this command to disable any minimum password length
limitation. If the password length requirement is disabled, users can be
created with no password. In other words, when you issue the no passwords
min-length command, the minimum password length is zero.
Syntax
passwords min-length length
no passwords min-length
• length — The minimum length of the password (Range: 8–64 characters)
Default Configuration
By default, the minimum password length is 8 characters.
Command Mode
Global Configuration mode