Dell PowerConnect 6224 - Boot Menu Functions

Command Groups 97
IPv6 Routing
show ipv6 pimsm neighbor Displays IPv6 PIMSM neighbors learned on the
routing interfaces.
PE
show ipv6 pimsm rphash Displays which rendezvous point (RP) is being
selected for a specified group.
PE
show ipv6 pimsm rp
mapping
Displays all group-to-RP mappings of which the
router is aware (either configured or learned
from the BSR).
PE
NOTE: *For the meaning of each Mode abbreviation, see "Mode Types" on page 60.
Command Description Mode*
clear ipv6 neighbors Clears all entries in the IPv6 neighbor table or
an entry on a specific interface.
PE
clear ipv6 statistics Clears IPv6 statistics for all interfaces or for a
specific interface, including loopback and
tunnel interfaces.
PE
ipv6 address Configures an IPv6 address on an interface
(including tunnel and loopback interfaces).
IC
ipv6 enable Enables IPv6 routing on an interface (including
tunnel and loopback interfaces) that has not
been configured with an explicit IPv6 address.
IC
ipv6 forwarding Enables IPv6 forwarding on a router. GC
ipv6 host Defines static host name-to- ipv6 address
mapping in the host cache.
GC
ipv6 mld last-member-
query-count
Sets the number of listener-specific queries sent
before the router assumes that there are no local
members on the interface.
IC
(VLA
N)
ipv6 mld last-member-
query-interval
Sets the last member query interval for the
MLD interface, which is the value of the
maximum response time parameter in the
groupspecific queries sent out of this interface.
IC
(VLA
N)
ipv6 mld-proxy Enables MLD Proxy on the router. IC
Command Description Mode*