Dell PowerConnect 6224 - Show Ipv6 Route Summary

IPv6 Routing Commands 815
Example
The following example shows the preference value associated with the type of
route.
console#show ipv6 route preferences
Local.......................................... 0
Static......................................... 1
OSPF Intra-area routes......................... 110
OSPF Inter-area routes......................... 110
OSPF External routes........................... 110
show ipv6 route summary
Use the show ipv6 route summary command in Privileged EXEC mode to
display a summary of the routing table. Use all to display the count summary
for all routes, including best and non-best routes. Use the command without
parameters to display the count summary for only the best routes.
Syntax
show ipv6 route summary [all]
• all — Displays the count summary for all routes.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.