Dell PowerConnect 6224 - Copy

Configuration and Image File Commands 1113
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example restores the switch to its default configuration.
console#clear config
copy
Use the copy command in Privileged EXEC mode to copy files from a source
to a destination.
Syntax
copy source-url destination-url {xmodem | tftp: //ipaddr/filepath/filename |
sftp|scp:
//username @ ipaddr/filepath/filename | hostname |
copy ftp ftp:
//ipaddr/filepath/filename image }
• source-url — The location URL or reserved keyword of the source file
being copied. (Range: 1–160 characters.)
•
destination-url — The URL or reserved keyword of the destination file.
(Range: 1–160 characters.)
•
ipaddr — The IPv4 or IPv6 address of the server.
•
hostname — Hostname of the server. (Range: 1–158 characters)
•
filepath — The path to the file on the server.
•
filename — The name of the file on the server.
•
username — The user name for logging into the remote server via SSH.
The following table lists and describes reserved keywords.
Reserved
Keyword
Description
running-config Represents the current running configuration file.