Dell PowerConnect 6224 - Script Apply

Configuration and Image File Commands 1119
Syntax
filedescr {image 1|image2} description
no filedescr {image 1|image2}
• image1|image2 — Image file.
•
description — Block of descriptive text. (Range: 0-128 characters)
Default Configuration
No description is attached to the file.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example attaches a file description to image2.
console#filedescr image2 "backedup on 03-22-05"
script apply
Use the script apply command in Privileged EXEC mode to apply the
commands in the script to the switch.
Syntax
script apply scriptname
• scriptname — Name of the script file to apply. (Range 1–31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode