Dell PowerConnect 6224 - Boot Host Retry-Count

1056 Autoconfig Commands
Command Mode
Global Configuration.
User Guidelines
This command has no user guidelines
Example
console#no boot host dhcp
boot host retry-count
The boot host retry-count command sets the number of attempts to
download a configuration. Use the "no" form of this command to reset the
number to the default.
Syntax
boot host retry-count retry
no boot host retry-count
• retry — The number of attempts to download a configuration (Range:
1–6).
Default Configuration
The default number of configuration download attempts is three.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#boot host retry-count 5