Dell PowerConnect 6224 - Switchport Protected Name

VLAN Commands 599
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures Ethernet port 1/g1 as a member of
protected group 1.
console(config)#interface ethernet 1/g1
console(config-if-1/g1)#switchport protected 1
switchport protected name
Use the switchport protected name command in Global Configuration mode
to adds the port to the protected group 1 and also sets the group name to
"protected".
Syntax
switchport protected groupid name name
no switchport protected groupid name
• groupid — Identifies which group the port is to be protected in. (Range: 0-
2)
•
name — Name of the group. (Range: 0-32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.