Dell PowerConnect 6224 - Show Ipv6 Pimdm Neighbor

812 IPv6 Routing Commands
Neighbor Count ................................ 0
Hello Interval (secs).......................... 30
Designated Router.............................. Not
Supported
console#show ipv6 pimdm interface all
Address Interface Neighbor Hello
Count Interval
-------------- --------- -------- -------
192.168.37.6 vlan 10 2 30
192.168.36.129 vlan 20 2 30
10.1.37.2 vlan 24 1 30
show ipv6 pimdm neighbor
The show ipv6 pimdm neighbor command is used to display PIM-DM
Neighbor information including Neighbor Address, Uptime and Expiry time
for all interfaces or for the specified interface.
Syntax
show ipv6 pimdm neighbor [ interface vlan vlan-id | all ]
• vlan vlan-id — A valid VLAN ID.
•
all — To show neighbor information for all valid interfaces.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC