Dell PowerConnect 6224 - Show Ip Rip Interface Brief

1028 Routing Information Protocol Commands
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information related to
the VLAN 15 RIP interface.
console#show ip rip interface vlan 15
Interface...................................... 15
IP Address..................................... -----
Send version................................... RIP-2
Receive version................................ Both
RIP Admin Mode.................................
Disable
Link State..................................... -----
Authentication Type............................ MD5
Authentication Key.............................
"pass123"
Authentication Key ID.......................... 35
Bad Packets Received........................... -----
Bad Routes Received............................ -----
Updates Sent................................... -----
show ip rip interface brief
Use the show ip rip interface brief command in Privileged EXEC mode to
display general information for each RIP interface. For this command to
display successful results routing must be enabled per interface (i.e. ip rip).