IP Routing Commands 731
Encapsulation Type.............................
Ethernet
IP MTU......................................... 1500
show ip protocols
Use the show ip protocols command in Privileged EXEC mode to display the
parameters and current state of the active routing protocols.
Syntax
show ip protocols
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays parameters and current state of active routing
protocols.
console#show ip protocols
Routing Protocol is "rip"
Sending updates every 30 seconds
Invalid after 180 seconds, hold down 120, flushed
after 300
Redistributing: RIP, Static, OSPF
Default version control: send version 1, receive
version 1
Interfaces:
To Next Page
Loading...
