System Management Commands 1329
Unit NSF Support
---- -----------
1 Yes
2 Yes
3 Yes
Per Unit Status Parameters are explained as follows:
show system
Use the show system command in User EXEC mode command to display
system information.
Syntax
show system [
unit
]
•
unit
— The unit number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system information.
console#show system
Parameter Description Range Default
NSF Support Whether a unit
supports NSF
Yes or No
To Next Page
Loading...
