OSPF Commands 875
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example shows the options for the clear ip ospf command.
console#clear ip ospf ?
<cr> Press enter to execute the
command.
configuration Restore OSPF configuration to
defaults
counters Clear OSPF counters
neighbor Bounce all OSPF neighbors
redistribution Flush and reoriginate
external LSAs
default-information originate
Use the default-information originate command in Router OSPF
Configuration mode to control the advertisement of default routes. Use the
no form of the command to return the default route advertisement settings
to the default value.
Syntax
default-information originate [always] [metric
integer
] [metric-type {1 |
2}]
no default-information originate [metric] [metric-type]
To Next Page
Loading...
