Dell PowerConnect 6224 - History Size

Line Commands 1145
Syntax
history
no history
Default Configuration
The default value for this command is enabled .
Command Mode
Line Interface mode
User Guidelines
This command has no user guidelines.
Example
The following example disables the command history function for the current
terminal session.
console(config-line)# no history
history size
Use the history size command in Line Configuration mode to change the
command history buffer size for a particular line. To reset the command
history buffer size to the default setting, use the no form of this command.
Syntax
history size number-of-commands
no history size
• number-of-commands — Specifies the number of commands the system
may record in its command history buffer. (Range: 0-216)
Default Configuration
The default command history buffer size is 10.