IPv6 MLD Snooping Commands 747
show ipv6 mld snooping groups
The show ipv6 mld snooping groups command displays the MLD Snooping
entries in the MFDB table.
Syntax
show ipv6 mld snooping groups [{vlan
vlan-id
| address
ipv6-multicast-
address
}]
•
vlan_id
— Specifies a VLAN ID value.
•
ipv6-multicast-address
— Specifies an IPv6 Multicast address.
Default configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
To see the full Multicast address table (including static addresses) use the
show bridge address-table command.
Example
console#show ipv6 mld snooping groups
Vlan Ipv6 Address Type Ports
---- ----------------------- ------- -------------------
---------------
1 3333.0000.0003 Dynamic 1/g1,1/g3
2 3333.0000.0004 Dynamic 1/g1,1/g3
2 3333.0000.0005 Dynamic 1/g1,1/g3
MLD Reporters that are forbidden statically:
To Next Page
Loading...
