Dell PowerConnect 6224 - Arp Retries

ARP Commands 651
User Guidelines
This command has no user guidelines.
Example
The following example defines a response timeout of 5 seconds.
console(config)#arp resptime 5
arp retries
Use the arp retries command in Global Configuration mode to configure the
ARP count of maximum requests for retries. To return to the default value,
use the no form of this command.
Syntax
arp retries integer
no arp retries
• integer — The maximum number of requests for retries. (Range: 0-10)
Default Configuration
The default value is 4 retries.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines 6 as the maximum number of retries.
console(config)#arp retries 6