Dell PowerConnect 6224 - Show Sntp Status

Clock Commands 1097
Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys:
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server Key Polling Priority
--------- ----------- ----------- -----
-----
10.27.128.21 Disabled Enabled 1
show sntp status
Use the show sntp status command in Privileged EXEC mode to show the
status of the Simple Network Time Protocol (SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.