Dell PowerConnect 6224 - Script Validate

1122 Configuration and Image File Commands
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the contents of the script file config.scr .
console#script show config.scr
interface ethernet 1/g1
ip address 176.242.100.100 255.255.255.0
exit
script validate
Use the script validate command in Privileged EXEC mode to validate a
script file by parsing each line in the script file.The validate option is
intended for use as a tool in script development. Validation identifies
potential problems though it may not identify all problems with a given
script.
Syntax
script validate scriptname
• scriptname — Name of the script file being validated. (Range: 1-31
characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.