Dell PowerConnect 6224 - Show Sflow Polling

Sflow Commands 1229
Example
console# show sflow 2 destination
Receiver Owner Time out Max Datagram Port IP Address
Index String Size
-------- -------- ---------- ------------ ----- ------------------
------------
2 0 1400 6343 0.0.0.0
show sflow polling
Use the show sflow polling command to display the sFlow polling instances
created on the switch.
Syntax
show sflow rcvr-index polling [ ethernet interfaces ]
• rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interfaces — The list of interfaces to poll.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
The following fields are displayed:
Poller Data
Source
The sFlowDataSource (unit/port) for this sFlow sampler. This
agent will support Physical ports only.
Receiver Index The sFlowReceiver associated with this sFlow counter poller.
Poller Interval The number of seconds between successive samples of the counters
associated with this data source.