Dell PowerConnect 6224 - Show Ipv6 Pimdm

810 IPv6 Routing Commands
console(config)#show ipv6 neighbors
Neighbor Last
IPv6 Address MAC
Address isRtr State Updated
Interface
-------------------- ----------------- ----- -------
---------
show ipv6 pimdm
The show ipv6 pimdm command is used to display PIM-DM Global
Configuration parameters and PIM DM interface status.
Syntax
show ipv6 pimdm
Command Mode
Privileged EXEC mode.
Default Configuration
There is no default configuration for this command.
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimdm
Admin Mode.....................................
Enable
PIM-DM INTERFACE STATUS