Dell PowerConnect 6224 - Show Stack-Standby; Show Supported Switchtype

1320 System Management Commands
show stack-standby
Use the show stack-standby command to show the Standby configured in the
stack. The show stack-standby command shows the configured or
automatically selected standby unit number.
Syntax
show stack-standby
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC or User EXEC
User Guidelines
No specific guidelines.
Example
console>show stack-standby
standby unit: 3
show supported switchtype
Use the show supported switchtype command in User EXEC mode to display
information about all supported switch types.
Field Description
Interface Port
Diagnostic Entry 1 80 character string used for diagnostics
Diagnostic Entry 2 80 character string used for diagnostics
Diagnostic Entry 3 80 character string used for diagnostics