Dell PowerConnect 6224 - Verification

Captive Portal Commands 1073
no session-timeout
• timeout —Session timeout. 0 indicates timeout not enforced (Range:
0–86400 seconds).
Default Configuration
There is no session timeout by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#session-timeout 86400
console(config-CP 2)#no session-timeout
verification
Use the verification command to configure the verification mode for a
captive portal configuration.
Syntax
verification { guest | local | radius }
• guest—Allows access for unauthenticated users (users that do not have
assigned user names and passwords).
• local—Authenticates users against a local user database.
• radius—Authenticates users against a remote RADIUS database.
Default Configuration
The default verification mode is guest.
Command Mode
Captive Portal Instance mode.