Dell PowerConnect 6224 - Show Ip Irdp

1012 Router Discovery Protocol Commands
User Guidelines
This command has no user guidelines.
Example
The following example sets the ip irdp preference to 1000 for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip irdp preference 1000
show ip irdp
Use the show ip irdp command in Privileged EXEC mode to display the
router discovery information for all interfaces, or for a specified interface.
Syntax
show ip irdp {vlan vlan-id |all}
• vlan-id — Valid VLAN ID
•
all — Shows information for all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.