System Management Commands 1335
--More-- or (q)uit
Selecting More (m) continues the display of output for the show tech-support
command.
show users
Use the show users command in Privileged EXEC mode to display
information about the active users.
Syntax
show users [ long ]
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a list of active users and the information
about them.
console#show users
Username Protocol Location
-------- -------- ------------
Bob Serial
John SSH 172.16.0.1
Robert HTTP 172.16.0.8
Betty Telnet 172.16.1.7
To Next Page
Loading...
