908 OSPF Commands
Redistribute into NSSA.........................
Enable
Default Information Originate.................. TRUE
Default Metric................................. 250
Default Metric Type............................ Non-
Comparable
Translator Role................................
Candidate
Translator Stability Interval.................. 2000
Translator State...............................
Disabled
show ip ospf asbr
The show ip ospf asbr command displays the internal OSPF routing table
entries to Autonomous System Boundary Routes (ASBR). This command
takes no options.
Syntax
show ip ospf asbr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ip ospf asbr
To Next Page
Loading...
