IPv6 Multicast Commands 751
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimsm
ipv6 pimsm bsr-border
Use the ipv6 pimsm bsr-border command to prevent bootstrap router (BSR)
messages from being sent or received through an interface. Use the "no" form
of this command to disable the interface from being the BSR border.
Syntax
ipv6 pimsm bsr-border
no ipv6 pimsm bsr-border
Default Configuration
BSR-border is disabled by default.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimsm bsr-border
To Next Page
Loading...
