EasyManuals Logo

Dell PowerConnect 6224 Command Line Interface Guide

Dell PowerConnect 6224
1372 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #503 background imageLoading...
Page #503 background image
RADIUS Commands 503
key
Use the key command to specify the encryption key which is shared with the
RADIUS server. Use the "no" form of this command to remove the key.
Syntax
key
key-string
key-string
— A string specifying the encryption key (Range: 0 - 128
characters).
Default Configuration
There is no key configured by default.
Command Mode
Radius mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies an authentication and encryption key of
lion-king
”.
console(config)#radius-server host acct 3.2.3.2
console(Config-acct-radius)#key keyacct
msgauth
Use the msgauth command to enable the message authenticator attribute to
be used for the RADIUS Authenticating server being configured. Use the
“no” form of this command to disable the message authenticator attribute.
Syntax
msgauth
no msgauth

Table of Contents

Other manuals for Dell PowerConnect 6224

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerConnect 6224 and is the answer not in the manual?

Dell PowerConnect 6224 Specifications

General IconGeneral
Switching Capacity128 Gbps
Forwarding Rate95.2 Mpps
Power Supply100-240 VAC, 50/60 Hz
RAM128 MB
Flash Memory32 MB
Layer SupportLayer 2/3
StackingUp to 12 units
Weight12.1 lbs
MAC Address Table Size16, 000
Jumbo Frame SupportUp to 9, 216 bytes
Operating Temperature0°C to 45°C
Storage Temperature-40°C to 70°C
Humidity10% to 90% (non-condensing)
Ports24 x 10/100/1000BASE-T
VLAN SupportYes (802.1Q)
Dimensions17.3 x 13.8 x 1.7 in (440 x 350 x 44 mm)

Related product manuals